Pipe hydro-testing machine
Pipe hydro-testing is performed on PHTM MACHINE. Pipe hydro-testing machine is designed and constructed to allow the hydrostatic tests on GRP pipes, according to all major international standards.
The pipe is rolled on supports and by lifting tables centred between two heads. Pipe is inserted between sealing plates and closed by hydraulic unit. The pipe hydraulic test is performed by water pressure unit. After successful pressure test, pipe is released from the sealing plates by hydraulic cylinder. PHTM is complete with electric power box and is completely wired.
PHTM area and height required:
- Width = 5 m
- Length = 20 m
- Height = 5 m
Requirement for the concrete water reservoir under the machine (inside dim.):
- Width = 3,5m
- Length = 15,5 m
- Height = 3,1 m
- Max. Power Consumption = 50 Kw
- Max. Water Supply = 100 l/h
Machine Operators Requirement:
(workers per shift)
- 1 machine captain
- 1 machine operator
Main characteristics of the PHTM machine:
- Max. test pipe length: 12000 mm
- Test pipe diameter: 300-2600/4000 mm
- Max. end trust load: 640/1100/1600 tons
The testing capacity of the PHTM Machine is fully in line with the capacity of CFW Machine, the 100% pipe testing can be achieved.
PHTM Machine is fully automated machine. All operations of pipe sealing and pipe filling are automatic. The testing pressure and time can be easily checked on the measurement equipment, which is also part of the machine.