news

Subscribe to Technobell's mailing list!

* indicates required field
Email Format
linkedinyoutube

JOB OPPORTUNITIES

WE’RE HIRING:

· CHEMICAL ENGINEER

· ELECTRICAL ENGINEERING TECHNOLOGIST

 

 

Off line rectification machine

The ORM Machine is designed to be used when shorter pipes, pipes for fittings or some repair works are required. During cutting and grinding, dust is a side product. Grinding and cutting tools are connected by tubes with the suction line and the dust filter.
Support tables and trolley with grinding and cutting tools can be moved on rails. By setting its position, any pipe length between 2 m and 12 m can be produced or repaired. No additional equipment is necessary for pipe manipulation. The pipe is rolled and un-rolled on the machine from pipe transport trolley on the pipe support beams.

ORM area and height required:

  • Width = 4,7 m
  • Length = 15 m
  • Height = 2 m

Utility requirements

  • Max. installation power: 40 kW

Machine operators requirement:

  • 1 machine operator
technobell001
technobell002
orm1
orm2